MATSUURA USA WILL DEBUT THE INNOVATIVE AND REVOLUTIONARY MATSUURA LUMEX AVANCE SERIES AT RAPID + TCT 2018

St. Paul, MN (March 16, 2018) — Matsuura Machinery USA, Inc. announces the exhibition of the Matsuura LUMEX Avance Series at RAPID + TCT 2018, North America’s preeminent event for discovery, innovation and networking in 3D manufacturing.

The Matsuura LUMEX Series is a powder bed metal AM platform with machining capability.  The Matsuura LUMEX Series combines selective laser sintering (SLS) along with high speed milling (HSM) commonly called Hybrid AM.

Matsuura’s combination of additive and subtractive technologies enables the production of parts and component geometries in a method that has never been possible or imagined. Often referred to as a “one machine, one process” system, the Matsuura LUMEX series permits production of the most complex and challenging parts through total manufacturing by digital engineering using 3-D data. The process produces highly accurate parts from metal powders that are melted and sintered using a laser while surfaces are precisely milled at high speeds. These machines possess both high-speed milling and laser sintering capability.

The Matsuura LUMEX Avance-25 metal laser sintering hybrid milling machine relies on one-machine, one-process manufacturing of complex molds and parts by fusing metal laser sintering (3D SLS) technology with high speed milling technology. The machine enables production of complicated parts and molds through total manufacturing by digital engineering, using 3D data.

The Matsuura LUMEX Avance-25 is capable of processing parts and molds up to 256 mm x 256 mm x 185 mm with an option allowing processing of 256 mm × 256 mm × 300 mm. The Matsuura LUMEX Avance-25 serves predominantly the high value, high accuracy mold and die market. Dies and molds with very complex geometries can be fabricated in one piece with high accuracy, shortening lead time and reducing manufacturing costs to a half or even a third of conventional methods.

The Matsuura LUMEX Avance-25 achieves the highest accuracy in part fabrication since metal powders are melted and sintered via laser, while surfaces are precisely milled at high speeds. 3D cooling channels can be incorporated into molds in the single setup, thereby increasing cooling efficiency and enabling high-cycle injection molding with better than ever quality and precision, reducing costs and improving efficiency.

Differentiated original parts and mold production with internal structures, thus far considered impossible, are achievable on the Matsuura LUMEX Avance-25. The Matsuura LUMEX metal laser sintering hybrid milling machine is capable of quick turn production of custom parts and molds, whether prototypes or small production run parts and molds.

“Rising interest in the Matsuura LUMEX products from aerospace and automobile industries searching for a machine capable of creating larger, high value-added parts prompted Matsuura to develop the Matsuura LUMEX Avance-60,” Houle explained.

The Matsuura LUMEX Avance-60 boasts the largest Powder Bed Platform available in the market and can process parts and molds up to 600 mm x 600 mm x 500 mm. The machine is also outfitted with a high power 1kW fiber laser that significantly reduces sintering time.

The Matsuura LUMEX Avance-60 provides an increased speed of powder distribution to the table top surface along with a fully integrated automatic powder supply, collection and recycle system. Metal powder materials are distributed automatically into the sintering chamber without operator contact, eliminating powder dispersion in the work area and preserving a safe environment. Unused powder is automatically collected, sieved and recycled.

Matsuura Machinery USA, Inc., located in St. Paul, MN is the U.S. subsidiary of Matsuura Machinery Corporation in Japan. Since 1935, Matsuura has been the forerunner in designing innovative technology and manufacturing solutions to a variety of industries around the globe. Matsuura Machinery USA, Inc. delivers unmatched excellence in 5-axis, vertical, horizontal, linear motor, multi-tasking CNC machine tools and machines with a powder bed metal AM platform with machining capability. Matsuura Machinery USA, Inc. provides the service, applications and technical field support that have always been the Matsuura standard for business. For more information on Matsuura LUMEX products, contact: [email protected] or visit: www.matsuurausa.com.